Many things in life are usually taken for granted. However, you can never take for granted tightening your electric chainsaw chain. The electric chainsaw chain can get stretch as you use it more and more every time. As a result, the chain will be loosened up on the bar. This might result in a very dangerous situation. Nobody wants that.

Since the invention of electric chainsaws more and more accidents are occurring resulting in thousands of injuries. Sometimes the blade slides off the guide bar while being used. This is just one among many other examples. These situations are extremely dangerous since they can end up killing the operator. This is why it has become highly important to give proper maintenance to the chainsaw and to keep it clean. To ensure your own safety and the safety of the people that surround you, it is necessary to take special precautions when managing dangerous equipments and machinery.

In addition, you need to make sure that your chain does not need to be tightened before using it again.

Nevertheless, there are a lot of people that have never tightened an electric chainsaw before. It could be due to the fact that they have never worked with one before or they are just beginning to do so. If you need help with knowing how to tighten your chainsaw chain, this is the right article for you. But if you do know, this is a chance to learn some tips so you make sure to take all the precautions needed in order to protect yourself and those close to you.

How to Tighten an Electric Chainsaw Chain

electric chainsaw

If you properly follow the next steps, you will tighten the chain on your chainsaw in less than a minute.

Checking Chainsaw Chain Tension

The first thing you need to do is checking the tension of the chain, do this in order to determine if the chain needs to be tightened or not. Before attempting anything, make sure that your electric chainsaw is turned off and not connected to its power source. This will prevent you from having any unwanted electrical accidents. 

Then, it is time to pull the chain and try to unmount it from the guide bar. You will get to pull the chain just a little, if the chain is properly tightened. If this is the case, the links won’t move away from the guide bar meaning that you might not need to tighten your chainsaw chain any more than it already is. The drive links are designed to keep attached to the bar, but there could be some room left for the chain to come off a little.

If this is not the case and, on the contrary, the links actually come off the bar in a complete motion, it means that your equipment chain does need tightening. Make sure not to tighten the chain more than you need to. There should always need to be some room left so you are able to pull the chain a little from the bar but not too much so the links are not disengaged from the guide bar. Not doing this with the proper care could result in putting the operator’s life in danger when using the chainsaw again since the chain can break con starting the engine.

Tightening the Chainsaw Chain

We will, now, see how you are going to tighten your chain in the case it needs to be tightened. We highly recommend following these steps very carefully. If you don’t, you might put your life or somebody else’s life in danger. Try not to skip any step and more importantly, always remember to take extra precautions when handling heavy machinery. Chainsaw maintenance might be a little tedious but we will try to make it as easy for you as we can.

First, you need to know that most chainsaws usually come with a “scwrench” which is a tool designed specifically for the chainsaw that it came with. If you don’t have it with you, we strongly recommend you to stop and get one before continuing. However, if you don’t find the proper one for your chainsaw, you can use a screwdriver and a wrench to have the job done. You have to find the right size for doing it, though.

Before proceeding, you will need to put your attention on two nuts and one screw. Just take the wrench and loosen the two nuts in order to give the necessary room to the guide bar and the chain to be tightened. They are normally located on the side of the bar panel and they are not complicated to find. Depending on the kind of chainsaw it might also be located at the same place as the nuts so you will have to unlock the brake in order to complete this task.

The next step is you will need to find the screw that is normally on the side chainsaw sidebars. When you find it, you can get the screw tightened to tighten the blade. Don’t over tighten it. Take your time to do it.

Now the last step which is very important; after tightening the screw the proper way, you need to lift up the chainsaw nose and then get the nuts on the nuts on the side of the guide bar panel tightened. This is a very important step and should not be skipped.

If you do not follow this last step carefully your chainsaw will suffer some damage and it might break improving the chance of causing an accident and put your life at risk. Finally, after having tightened the nuts that are on the chainsaw side guide bar, you have finished this process. Remember to have extra care when managing dangerous heavy equipment or machinery, since not taking the proper care as well as neglecting on following these directions properly will most likely raise the chance of suffering injuries as a result of an unwanted accident when using your electric chainsaw.